Best Quality

  • End Gable
    • Flush Eave
    • Elite Eave
    • 8’ walls available as an option
  • Side Gable
    • Flush Eave
    • Elite Eave
    • 8’ walls available as an option
  • Hip Roof
    • Elite Eave

Features

    • 2) 4×6 Southern Yellow Pine Skids, notched for every floor joist 87’’ apart
    • 2×6 Roll Formed 20GA Galvanized G-90 Steel Floor Joists 16’’ on center
    • ¾’’ Tongue and Groove pressure treated plywood screwed to 20GA steel joists
    • 2×4 Roll Formed 20GA Galvanized G-90 Steel wall studs 24’’ on center in 6’ 6’’, 7’ or 8’ wall height
    • 2×4 Roll Formed 20GA Galvanized G-90 steel roof frame 24’’ on center front to back and side to side.
    • 3 on 12 roof pitch
  • Aluminum Twin Rib or Lap Siding available in the 7 standard colors as follows:

White, Cream, Antique Beige, Clay, Dove Grey, Pewter Gray, Cedar Timber Tone

  • Aluminum Twin Rib or Lap Siding available in the 11 Premium colors as follows:

Grey Timber Tone, Redwood Timber Tone, Emerald Green, Hunter Green,Sage Green, Burgundy, Brown, Black, Mediterranean Blue, Barn Red, Candy Apple Red

  • Trim available in 18 colors as follows:

White, Cream, Antique Beige, Clay, Dove Grey, Pewter Gray, Cedar Timber Tone, Grey Timber Tone, Redwood Timber Tone, Emerald Green, Hunter Green,Sage Green, Burgundy, Brown, Black, Mediterranean Blue, Barn Red, Candy Apple Red

  • Flush eve with ample overhang on drip edge
  • 29 GA Galvalume Steel 5 Rib  Roof Material Standard
  • 29 GA Steel Roof in 18 premium colors available to upgrade
  • Baked enamel finish on aluminum siding and painted roof material
  • Each rafter directly on top of a wall stud for continuous load transfer
  • Vertical Roof Panels
  • Continuous Roof System with Crimped Ridge
  • Solid insulated door with locking door knob

The Floor

The floor of the Best Aluminum Garage is the best floor available on the market and its the strong foundation that starts every great shed we sell. Solid 4’’x6’’ Ground Contact Southern Yellow Pine (SYP) skids are notched 1 ½ inches for each 20 gauge Galvanized Steel 2’’x6’’ floor joist to sit cradled in before being screwed into the skids with  5/16’’x4’’ lag screws. This type of fastener is one of the many extra step we take to give all of our best quality buildings a 180 MPH wind rating. This combination of cradle notches and screwing the joist to the skids in your new shed; makes a super tough start to a great floor system that you can count on to be maintenance free and worry free for years to come. The floor frame is decked with ¾’’ Tongue and Groove Plywood and screwed to the floor joists. Using ¾’’ Tongue and Groove Plywood instead of ⅝’’ or thinner plywood, is what gives our floors the superior strength you can always expect from us. Furthermore, using screws, instead of nails to fasten the plywood to the floor joists ensures that you don’t have to worry about nails that back out over the lifespan of your new shed. All these features of our floor system give you the peace of mind knowing you can keep using your new shed for years to come. If you are looking for an even greater level of protection for your new shed floor we can apply a floor enamel to the entire floor to make sure the plywood is sealed from any spills that may occur down the road. This coating is applied in a two step process; first, an Extreme Block primer is rolled on followed by the enamel coating, creating a great seal for the lifespan of the building. The spill proof, stain proof, finish is a great advantage to have in your new shed when the time comes to wipe up unexpected spills.

Better Quality

  • End Gable
    • Flush Eave
    • Deluxe Eave
    • Elite Eave
  • Side Gable
    • Flush Eave
    • Deluxe Eave
    • Elite Eave

Features

    • 2) Double 2×6 Southern Yellow Pine Skids, notched for every floor joist
    • Pressure Treated Skids 89’’ on Center  
    • 2×6 Southern Yellow Pine Floor Joists 16’’ on center
    • 2”x6” Pressure Treated Southern Yellow Pine floor joists 16″ on center
    • 3/4″  Tongue and Groove Plywood floor nailed to floor joists
    • 2×4 Wall studs 24’’ on center in 6’ 6’’, 7’ or 8’ wall height
    • 3 on 12 Roof Pitch
    • 24 Gauge Aluminum Rainlock in Silver Rainlock or 29 GA Galvalume Steel 5 Rib  Roof Material Standard
    • 24 Gauge Aluminum Rainlock Roof Material in 18 premium colors or 29 GA Steel Roof in 18 premium colors available to upgrade
    • Baked enamel finish on aluminum siding and painted roof material
    • 24 Gauge Aluminum Twin Rib Siding in 5 color choices
  • Aluminum Twin Rib or Lap Siding available in the 7 standard colors as follows:

White, Cream, Antique Beige, Clay, Dove Grey, Pewter Gray, Cedar Timber Tone

  • Aluminum Twin Rib or Lap Siding available in the 11 Premium colors as follows:

Grey Timber Tone, Redwood Timber Tone, Emerald Green, Hunter Green,Sage Green, Burgundy, Brown, Black, Mediterranean Blue, Barn Red, Candy Apple Red

  • Trim colors available in 18 colors as follows:

White, Cream, Antique Beige, Clay, Dove Grey, Pewter Gray, Cedar Timber Tone, Grey Timber Tone, Redwood Timber Tone, Emerald Green, Hunter Green,Sage Green, Burgundy, Brown, Black, Mediterranean Blue, Barn Red, Candy Apple Red

  • Flush Eve with amp overhang
  • Deluxe Eve with 2’’ soffit and 2.5’’ Boxed eave Fascia
  • Baked Enamel Finish on Aluminum Siding and Painted Roof Material
  • 2×4 Rafters with collar tie
  • Vertical Roof Panels
  • Vented ridge cap with open cell foam seal to prevent pests and debris from entering the building.
  • Solid insulated door with Locking Door knob
  • Extruded Aluminum Door Threshold

The Floor

The floor of the Better Aluminum Garage is the best floor available on the market and its the strong foundation that starts every great shed we sell. Double 2’’x6’’ Pressure Treated Southern Yellow Pine (SYP) skids are notched 1 ½ inches for each pressure treated SYP 2’’x6’’ floor joist to sit cradled in before being toenailed into the skids with nails. This combination of cradle notches and toe-nailing the joist makes a super tough start to a great floor system that will be maintenance free and worry free for years to come. The floor frame is decked with a ¾’’ Tongue and Groove Plywood nailed to the floor joists. Using ¾’’ Tongue and Groove Plywood instead of ⅝’’ or thinner plywood, is what gives our floors the superior strength you can always expect from us. All these features of our floor system give you the peace of mind knowing you can keep using your new shed for years to come. If you are looking for an even greater level of protection for your new shed floor we can apply a floor enamel to the entire floor to make sure the plywood is sealed from any spills that may occur down the road. This coating is applied in a two step process; first, an Extreme Block primer is rolled on followed by the enamel coating, creating a great seal for the lifespan of the building. The spill proof, stain proof, finish is a great advantage to have in your new shed when the time comes to wipe up unexpected spills.

The Good Gable (Good Garage)

  • Garage Side Gable
  • Garage End Gable

Features

  • (2) 4”x6” Pressure Treated Solid Skids 68’’ on Center
  • 2”x6” Pressure Treated Southern Yellow Pine floor joists 16″ on center
  • Double End Joist w/Double Galvanized “L” Bracket for stability in 4 colors
  • 3/4″  Tongue and Groove Plywood floor nailed to floor joists with .110 x 3-1/4″ screw shank nails
  • 2×4    Wall studs 24’’ on center in 6’, 7’ or 8’ wall height
  • 3 on 12 Roof Pitch, nine foot wall height roof pitch is 1 ½  on 12
  • 24 Gauge Aluminum Twin Rib Siding in 5 color choices
  • Trim available in 8 colors: Colonial White, Beige, Oak, Ash Gray, Barn Red, Hunter Green, Burnished Slate, or Black
  • 24 Gauge Aluminum Rainlock Roof Material 4 color choices
  • Flush Eve with amp overhang
  • All Stainless steel Fasteners on the Exterior
  • Baked Enamel Finish on Aluminum Siding and Painted Roof Material
  • 2×6 Roof Joists
  • Aluminum Center Rafter on all buildings longer than 16’
  • Vertical Roof Panels
  • Continuous Roof System with Crimped Ridge
  • Solid insulated door with Locking Door knob and keyed alike Deadbolt
  • Sturdy polished Aluminum Drip Edge over door
  • Extruded Aluminum Door Threshold
  • Security Door Installation from the inside
    • Door can’t be removed from the outside

The Good Gable shed is an economical solution to any storage need and is available in a wide range of sizes from 8×8 to 12×24. Each shed floor features ¾’’ tongue and groove plywood on top of 2×6 pressure treated Southern Yellow Pine floor joists spaced 16’’ on center with doubled end floor joists and 4×6 skids. The Good Gable offers wall heights of six, seven, eight, and even nine feet and is constructed of 2×4 wall studs 24’’ on center.  The customizable wall height makes this shed the perfect solution for your storage needs.

The roof frame is comprised of 2×6 roof joists with an aluminum center rafter on all sheds longer than 16’ and comes standard with a 3 on 12 roof pitch. The roof is finished with an aluminum Rainlock material available in Barn Red, Hunter Green, Burnished Slate or mill finished Silver color options. The Good Gable features our Continuous Metal Roof System for a leak proof guarantee. This system features a solid continuous piece of aluminum roof metal from one side of the building to the other with a crimped ridge. It also protects against water, debris, and pests from entering underneath a traditional metal ridge cap.

The Good Gable comes standard with an insulated fiberglass mobile home door complete with a locking door knob and deadbolt available in 4’, 5’ or 70’’ double doors. With the 8’ or 9’ wall, a Good Gable can feature a 74’’ or 94’’ wide roll-up garage door. While the 70’’ double door will accommodate almost any riding mower or ATV, a roll-up garage door can bring a whole new level of ease and satisfaction to pulling in and out of the building without worrying about a swinging door getting in the way. The roll-up garage door is spring assisted for an easy opening and closing operation.  When the door is in the open position it is neatly coiled overhead and out of the way. Ramps made of all aluminum with extruded Aluminum decking come in 4’, 5’, 6’ and 8’ widths are available to be added any shed.

We also offer  22’’x 36’’ white grid windows with screens that can be added to this shed to match your style and lighting preferences. Aluminum framed shelves and workbenches finished with ¾” Plywood can be installed to maximize the space and versatility of your shed. The Good Gable offers many other options to choose from including wall and/or roof insulation WHAT KIND for a extra layer of protection from the heat and cold.  For those extra heavy loads we can even place the 2×6 floor joists 12’’ on center, giving your X amount of pounds per square foot of floor load.

See our Wooden Portable Garage